P3 Lights Specifications

Current draw: tail light 100 mA, brake light 390 mA instantaneous, 150 mA continuous
Operating voltage: 9 - 16 VDC
Intensity regulation: LED intensity is controlled by an internal current regulator to maintain brightness even under low voltage conditions.
Angle of half intensity: 4°
Wavelength: 612 nm
Voltmeter accuracy (P3⁺): ±0.1 V
Control module dimensions: Length: 2.36" Width: 1.58" Height: 0.59"
Control module weight: 1 oz.
LED module dimensions: 3" x 0.625" x 0.35"
LED module weight: 3/8 oz.
Fully compatible with BMW CAN-bus
Fully compatible with BMW 2-phase brake light firmware that illuminates a single-filament brake light as a tail light, as used on the R1200RT and other models.