IQ-170

IQ-170 Intelligent Lighting Controller

The IQ-170 Intelligent Lighting Controller from Skene Design allows you to instantly control the brightness of two driving or fog lights.

This controller is a perfect complement to high intensity LED driving and fog lights that are now available. Often these lights are too bright to operate at full power during the day. With the IQ-170, the rider can program the precise lamp brightness setting that he wants for daytime operation, and immediately switch from one brightness setting to the other.

Operation:

Whenever the motorcycle's high beam is switched on, the IQ-170 controller sends full power to the lamps. When the high beam is switched off, the lamps are set to a different power setting, which may easily be programmed to any of 11 different power levels, ranging from off to 100%, in 10% steps.

Additional brightness settings are supported with the use of a customer-supplied toggle/rocker switch. If a two-position switch is added, two brightness settings are available in addition to the high beam setting. If a three-position switch is used, three brightness settings are available. Each of these settings is adjustable, providing very flexible and convenient control over the lamps' brightness.

The IQ-170 has two channels, each of which can power a 60 watt (5 amp) lamp. They can be connected in parallel to power a combined load of 120 watts (10 amps). The lamps can be connected through a fuse directly to the vehicle's battery. No separate relay is required, as the controller performs this function. When you turn off the ignition, no current flows through the lights.

ALERT! feature (NEW)

The IQ-170's new and unique ALERT! feature allows you to rapidly modulate the brightness of the lamps attached to the IQ-170 when you really need to be noticed by traffic ahead.

When you need to maximize your visibility, just tap your high beam switch twice within one second, and the IQ-170 instantly responds with a brief, but highly conspicuous flashing sequence. No matter what brightness you have the IQ-170 set to, it will immediately flash the attached lamps at maximum brightness in a very conspicuous sequence, like an over-caffeinated high-beam switch. The sequence takes less than two seconds, but you've just greatly improved your likelihood of being seen. Normal application of the high beam or a single tap will not trigger the ALERT! sequence, so it has no effect on your usual riding style.

Installation is quick and easy, and the controller can be used with any motorcycle. A comprehensive installation guide and all necessary connectors are included.

Skene Design provides an unconditional 30 day money back guarantee, and a 2 year warranty in the event of any defect in the product.