|
Low Profile
Front License Plate Bracket
|
Don't want to drill unsightly holes through the front of your
bumper?
Do you want an elegant, unobtrusive license plate mount that
looks better than the stock model?
Do you need to mount a front license plate but don't want to
pay over $200 to have a bracket painted to match your car?
Do you need to mount a plate for a fix-it
ticket?
If so, the Skene Design low profile front license plate
bracket is exactly what you've been looking for.
Its sleek, minimalist design makes it all but invisible. A low cost, low profile alternative to bulky,
stock OEM brackets, this bracket
does not require any holes be drilled into the
front face of your bumper. It leaves virtually no trace if you plan to
remove your plate at a later date. It also
requires no expensive painting to match your car's color.
(Two small, 1/8" holes are required on the lower surface of the
bumper. These holes are virtually invisible should you remove the bracket
in the future.)
|
|
Click for additional images
click again to return
|
Fabricated from aluminum alloy, the license plate bracket is shipped complete with all
necessary stainless steel mounting hardware, 4 stylish, stainless
button-head socket screws to mount your license plate, and even includes an Allen key for ease of assembly.
Clear, concise instructions make assembling and mounting the bracket easy. It typically takes less than 10 minutes. The bracket mounts on
the underside of the bumper and fits virtually any car with a bumper
similar to that shown in the above photo. Three versions are
available, Short, Medium and Long, depending upon the distance between the front of the bumper
and the grill.
Scroll down to your car model in the following table to find the correct
bracket size.
If your car is not listed, use the drawing below to determine which model
you need.
European plate model now available!
Click here for photos.
Skene Design provides an unconditional 30 day money back guarantee if you are
not completely satisfied with the product,
and a 1 year warranty in the event of any defect in the product.
To order a Low
Profile Front License Plate Bracket, select the model (short, medium
or long), quantity, and shipping destination from the table below:
|